JZX100 JZX90
Showing 229–240 of 248 results
-
Valve Shim 1JZ 2JZ
€4.90Valve Shim to suit Toyota 1JZ and 2JZ engines
Available in the following thickness:
2.50mm 2.55mm 2.60mm 2.65mm 2.70mm 2.75mm 2.80mm 2.85mm 2.90mm 2.95mm 3.00mm 3.05mm 3.10mm 3.15mm 3.20mm 3.25mm 3.30mm
Each shim sold separately
-
VVTI Solenoid 1JZ 2JZ
€115.01 (excl. VAT €93.50)Genuine Toyota VVTI Solenoid suitable for 1JZ and 2JZ VVTI Engines
-
VVTI Solenoid O Ring 3SGE 1JZ 2JZ
€1.78 (excl. VAT €1.45)VVTI Solenoid O Ring to Suit
1JZ 2JZ 3SGE engine
-
Walbro Fuel Pump JZX100
€135.30 – €166.05Walbro Fuel pumps to suit
Jzx100 Jzx90 Jzx81
Supra Jza80
Includes filter/Pickup bag/Plug
Variation:
- 350LPH (up to 500HP)
- 450LPH ( Up to 750HP)
-
Water Pump 1JZ-GE VVTI
€90.00 (excl. VAT €73.17)Water Pump to suit
1JZ-GE VVTI
JZX100 Chaser Mark II Jzx110
78mm flange diameter
pulley centre bore 42mm
Stud PCD 62mm
8mm studs
10 bolt holes through Gasket
Please check water pump dimension with your own before placing order
This pump is compatible with TYPE 2 in the pulley link below
Water Pump Pulley 1JZ 2JZ
-
Water Pump 1JZ-GTE Non VVTI and 2JZ-GTE
€89.00 – €276.75Water Pump suitable for
2JZ-GTE VVTI
2JZ-GTE Non-VVTI
1JZ-GTE Non VVTI
1JZ-GE Non VVTI
This pump has 10 bolt holes trough gasket and 91mm pulley diameter with 8mm stud holes and pulley centre bore of 58mm
Please make sure your are ordering correct pump before purchase
-
Water Pump 1JZ-GTE VVTI
€98.40 – €246.00Water Pump to suit 1JZ-GTE VVTI engine, commonly found in chaser jzx100 jzx110 , soarer jzz30 , crown jzs171 and some other models
This pump has 10 bolt holes through gasket and 78mm flange diameter, 42mm pulley centre bore, 62mm Stud PCD, 8mm studs
(not suitable for 1jz-gte non vvti)
Please make sure it is the correct pump you need before ordering.
Pully to suit water pump can be purchased in link below
-
Water Pump 2JZ 11 Hole Type
€121.00 (excl. VAT €98.37)11 Hole Toyota 2JZ through gasket water pump
This water pump has 1 extra hole than all other 1jz and 2jz water pumps through the gasket. (most jz engines use the 10 hole pumps so please check your pump before purchase)
Pulley Diameter 91mm
Pulley centre bore 58mm
8mm studs
11 holes through the water pump gasket
Please make sure to check the sizes with your own water pump to make sure you are ordering the correct pump before purchase
-
Water Pump Gasket 1JZ 2JZ
€12.90 (excl. VAT €10.49)Water pump gasket suitable for all 1jz and 2jz engines
-
Water Pump Housing O Ring 1JZ 2JZ
€4.45 (excl. VAT €3.62)Water pump to engine block o ring
Suitable for all 1jz and 2jz engines
-
Water Pump Pulley 1JZ 2JZ
€59.00Waterpump pulley to suit 1jz and 2jz engines
Please note there are 3 different size of pulleys for the jz engine, to order the correct pulley for your pump please check your waterpump size before purchase.
Type 1
64mm flange diameter, 28mm pulley centre bore, 49.5mm Stud PCD, 6mm studs, Commonly found on 2JZ-GE VVTI engines and some other models
Type 2
78mm flange diameter, 42mm pulley centre bore, 62mm Stud PCD, 8mm studs, Commonly found on 1JZ-GTE VVTI engines and some other models
Type 3
91mm flange diamter, 58mm pulley centre bore, 74mm Stud PCD, 8mm studs, Commonly found on 2JZ-GTE engines and some other models
-
Waterline Gasket 1JZ 2JZ
€6.15 (excl. VAT €5.00)Waterline gasket for the rear of the waterpump on 1jz and 2jz engines
Showing 229–240 of 248 results