AE86 Corolla
Showing 1–16 of 508 results
-
.4age Engine Pulleys
€17.52 – €37.40In Stock
Alloy Pulleys suitable for both 16v and 20v 4age engines
Alternator pulley (suits FWD and RWD engines)
Water pump pulley (available in both FWD and RWD variation)
Power steering pump pulley (suits FWD and RWD engines)
-
.NF Octane Booster
€17.07 (Exc. VAT: €17.07)In Stock
- Instantly increases octane rating by 6 RON
- Recommended for race days, track days and dedicated race cars
- One bottle treats 60 litres of fuel for the maximum octane increase
- Easy to use bottle fits straight into the fuel filler avoiding spillage
- Eliminates detonation / knocking / pinging / pinking
- Increases acceleration & performance
- Reduces hesitations & engine temperatures
- Safe for oxygen sensors & catalytic converters
- Child Proof Cap
- Non-Flammable
- *** Delivery restricted to Ireland & Northern Ireland only
-
.Toyota Bolt Kit
€52.84 (Exc. VAT: €52.84)In Stock
Original Bolt Kit
185 piece kit
Gold Zinc Plated
Includes the following most common bolts used on any Toyota
-M6 x20 quantity 20
-M6 x18 quantity 20
-M6 x18 quantity 20
-M6 x12 quantity 30
-M8 x25 quantity 12
-M8 x20 quantity 12
-M8 x15 quantity 12
-M8 x15 quantity 12
-M6 Nut quantity 27
-M8 Nut quantity 20*Note – Case (Box) may vary to image
-
02 Sensor Flange / Blank
€4.88In Stock
02 Oxygen / Lambda sensor Flange
Available in 2 variations:
Flange: Commonly used when you need to install an o2 sensor but your exhaust does not have a mounting location.
Blank: Used for blanking o2 sensor hole on your exhaust.
-
20V 4AGE Fuel Line Conversion Kit for AE86
€52.85 (Exc. VAT: €52.85)In Stock
4AGE Fuel Line Conversion Kit for AE86 Corolla
This is a direct fit kit which allows the use of your original ae86 fuel filter when fitting a 20v engine to your ae86. No cutting or modifications required on your original fuel lines.
Kit includes one feed and one return line with all hardware needed
-
20V 4AGE Rocker Cover Gasket Kit
€33.00 (Exc. VAT: €33.00)Out of Stock
Suitable for both 4AGE Silvertop and Blacktop Engines
-
20V 4age Top Engine Water Outlet Pipe
€70.25 (Exc. VAT: €70.25)In Stock
20V 4age Top Engine Water Outlet Pipe for rwd conversion
-
20V 4AGE Valves
€23.50In Stock
Ferrea 20v 4AGE valve
Intake valve standard size 26.5mm
Exhaust valve standard size 26mm
Price is per single valve
-
20V Distributor / Dizzy Cover
€52.85 (Exc. VAT: €52.85)In Stock
-
20V ITB Gaskets 4AGE
€18.98In Stock
4x gaskets for 20v Throttle bodies
Available for silvertop or blacktop
-
20V Rear Water Bypass Housing
€80.00In Stock
4age 20v rear water housing bypass plate
Available with or without heater option
-
4age 16v Adaptor Manifold for 20v Throttle Bodies itb’s
€295.00In Stock
These SQ Engineering adapters facilitate the conversion to individual throttle bodies (ITB’s) on a 4age 16v engine sourced from a 4age 20V engine. Machined from a billet aluminium plate this product makes for a bolt on upgrade thats quick and easy to fit.
It is compatible with all of the front and rear wheel drive top water outlet / bypass pipe variants as well as all of the 20V throttle types.
-
4AGE 16V Engine Gasket Kit
€130.08 – €219.51In Stock
-
4age 16v Piston Rings
€97.56In Stock
Nippon/TP Piston rings
Available in:
1.5 x 1.5 x 2.8 mm 81mm bore (Bigport Bluetop 4age 16V)
or
1.2 x 1.5 x 2.8 mm 81mm bore (Smallport 4age 16v)
or
1.2 x 1.5 x 3.0 mm 81mm bore (20v 4age blacktop and silvertop)
or
1.5 x 1.5 x 3.0 mm 81mm bore
*Oversize 81.50mm rings also available just add a note on your order
-
4age 16v Piston Set Bigport
€223.58In Stock
Set of 4 pistons for 4age 16v Bigport engine
Includes piston rings and gudgeon pins
Available for standard bore 81mm or oversize 81.5mm
Both Gudgeon pin sizes 18mm and 20mm available
Compression ratio 9.4:1
-
4age 16v Piston Set Smallport
€223.58In Stock
Set of 4 pistons for 4age 16v Smallport engine
Includes piston rings, 20mm gudgeon pins & clips
Suitable for use with or without factory oil squirters
Available for standard bore 81mm or oversize 81.5mm
Compression ratio 10.3:1
Showing 1–16 of 508 results