JZX81 Chaser
Showing 1–16 of 155 results
-
.NF Octane Booster
€21.00 (Exc. VAT: €17.07)In Stock
- Instantly increases octane rating by 6 RON
- Recommended for race days, track days and dedicated race cars
- One bottle treats 60 litres of fuel for the maximum octane increase
- Easy to use bottle fits straight into the fuel filler avoiding spillage
- Eliminates detonation / knocking / pinging / pinking
- Increases acceleration & performance
- Reduces hesitations & engine temperatures
- Safe for oxygen sensors & catalytic converters
- Child Proof Cap
- Non-Flammable
- *** Delivery restricted to Ireland & Northern Ireland only
-
.Toyota Bolt Kit
€67.23 (Exc. VAT: €54.66)In Stock
Original Bolt Kit
185 piece kit
Gold Zinc Plated
Includes the following most common bolts used on any Toyota
-M6 x20 quantity 20
-M6 x18 quantity 20
-M6 x18 quantity 20
-M6 x12 quantity 30
-M8 x25 quantity 12
-M8 x20 quantity 12
-M8 x15 quantity 12
-M8 x15 quantity 12
-M6 Nut quantity 27
-M8 Nut quantity 20*Note – Case (Box) may vary to image
-
.Water Pump Pulley 1JZ 2JZ
€51.45In Stock
Waterpump pulley to suit 1jz and 2jz engines
Please note there are 3 different size of pulleys for the jz engine, to order the correct pulley for your pump please check your waterpump size before purchase.
Type 1
28mm centre bore, 49.5mm PCD, 6mm studs, Commonly found on 2JZ-GE VVTI engines and some other models
Type 2
42mm centre bore, 62mm PCD, 8mm studs, Commonly found on 1JZ-GTE VVTI engines and some other models
Type 3
58mm centre bore, 74mm PCD, 8mm studs, Commonly found on 2JZ-GTE engines and some other models
-
2JZ-GTE Oil Pump
€404.15 (Exc. VAT: €328.58)In Stock
Genuine Toyota Oil Pump for 2JZ-GTE
Suitable for VVTI and Non-VVTI Engines
-
ACL Race Crankshaft Bearings 1JZ 2JZ
€209.10 (Exc. VAT: €170.00)In Stock
ACL Race Crankshaft bearing set
Includes Main bearings, Rod bearings and Thrust washers
Suitable for all 1jz and 2jz turbo and non-turbo models, both vvti and non-vvti
-
Air Filter 1GGTE and 1GGZE
€18.50 (Exc. VAT: €15.04)In Stock
Air filter for 1GGTE and 1GGZE engines
-
Alloy Radiator GX81 JZX81
€275.05 (Exc. VAT: €223.62)In Stock
Alloy Radiator for Toyota Chaser, Cresta, Cressida JZX81, GX81 and MX83
Suitable for 1jz 2jz and 1ggze 1ggte engines
Note: The 2 Mounting pins on the bottom of radiator are 28cm centre to centre (where the radiator sits into the car), some cars may have wider mounting points so pins may need to be relocated according to your car. If this is necessary it will need to be done by the customer.
-
ARP 1/2 Inch Socket
€8.91 (Exc. VAT: €7.24)In Stock
ARP 1/2 Inch Imperial 12 Point Deep Socket with 1/2 Drive
Suitable for use on Following ARP Stud and Bolt Kits
ARP 203-4204 Toyota 1JZ 2JZ Head Stud Kit
-
ARP Con Rod Bolts 1JZ 2JZ
€174.91 (Exc. VAT: €142.20)In Stock
ARP connecting rod bolts
Suitable for all 1jz and 2jz engine types
-
ARP Fastener Assembly Lubricant / Lube
€3.95 (Exc. VAT: €3.21)Out of Stock
-
ARP Flywheel Bolts 1JZ 2JZ
€57.70 (Exc. VAT: €46.91)In Stock
-
ARP Head Stud Kit 1JZ 2JZ
€276.75 (Exc. VAT: €225.00)In Stock
ARP head stud set to suit all 1jz and 2jz engines
Note: Special Socket is required for the nuts. The socket can be purchased in the link below
-
ARP Main Stud Kit 1JZ 2JZ
€217.10 (Exc. VAT: €176.50)In Stock
ARP Main Crankshaft Stud Kit
Suitable for all 1jz and 2jz engines
-
Audi R8 Coil On Plug
€38.90 (Exc. VAT: €31.63)In Stock
Audi R8 cop
NGK Brand
Price per single coil
Wiring loom plug to suit coil also available on request
-
BC Billet Valve Keepers / Collets 1JZ 2JZ
€184.50 (Exc. VAT: €150.00)In Stock
6° Billet Keepers / Locks for Toyota 2JZ/1JZ/7M applications (set/48)
-
BC Camshafts 1JZ
€965.00In Stock
Brian Crower camshafts for 1JZ-GTE engine
Available for vvti and non-vvti engines in Duration of 264 or 272
For full cam spec and info see link to Brian Crower website below
https://briancrower.com/makes/toyota/1jzgte.shtml
Showing 1–16 of 155 results