AW11 MR2

MR2 AW11
4AGE 16V
Year 1986-1989

Showing 1–12 of 69 results

  • .Toyota Bolt Kit

    66.00 (excl. VAT 53.66)

    Original Bolt Kit

    185 piece kit

    Gold Zinc Plated

    Includes the following most common bolts used on any Toyota
    -M6 x20 quantity 20
    -M6 x18 quantity 20
    -M6 x18 quantity 20
    -M6 x12 quantity 30
    -M8 x25 quantity 12
    -M8 x20 quantity 12
    -M8 x15 quantity 12
    -M8 x15 quantity 12
    -M6 Nut quantity 27
    -M8 Nut quantity 20

    *Note – Case (Box) may vary to image

  • 4AGE 16V Engine Gasket Kit

    295.00

    Genuine Toyota Engine Gasket Set To Suit 4AGE 16V

    BIGPORT BLUETOP (1983-1987)
    TVIS
    Cars: Ae82 AE86 AE92 AW11

    BIGPORT REDTOP (1987-1989)
    TVIS
    Car: AE92 AW11

    SMALLPORT REDTOP  (1989-1992)
    Also known as HI-Torque
    Car: AE92

    This kit will also fit 4AGZE 16V engines, But will not have the gaskets for the supercharger  (4AGZE 16V Gasket Kits are Discontinued by Toyota)

  • 4age 16v Piston Set Bigport

    305.00

    Set of 4 pistons for 4age 16v Bigport engine

    Includes piston rings and gudgeon pins

    Available for standard bore 81mm or oversize 81.5mm

    Both Gudgeon pin sizes 18mm and 20mm available

    Compression ratio 9.4:1

  • 4AGE Crank Trigger Pulley Kit 36-1

    299.00379.00

    Toyota 4AGE Crankshaft Trigger wheel kit

    A direct bolt on kit for your 4age.

    Compatible for both 16v, 20v engines and all oem oil pump types.

    RWD Version (rear wheel drive) AE86

    Single row pulley for alternator / water pump belt

    Can be used with original timing covers.

    Only suitable for engines using RWD water pump and RWD alternator bracket.

    Not suitable for use with AC or Power steering

    FWD Version  (front wheel drive) AE82 AE92 AE101 AE111 AW11 MR2

    Twin row pulley can be used with AC and power steering

    Only suitable for engines using fwd water pump and fwd alternator bracket.

    Oil sump pan lip may need to be ground away on some engines to allow clearance for trigger wheel, trigger wheel may interfere with original timing cover

    Kit includes the following:

    Crankshaft pulley with built in 36-1 toothed wheel

    Crank position sensor, Inductive Magneti Marelli 2 pin.

    Crank position sensor plug

    Crank position sensor bracket with all mounting bolts

    *note: RWD and FWD 4age engine pulleys have a different offset so they can not be interchanged, otherwise the auxiliary belt will not line up. Please make sure to select the correct kit for your engine.

  • 4AGE Crankshaft Bearing Set

    110.00

    4age Crankshaft Bearing set

    Includes the following:

    -Main bearing set

    -Big End Bearing set (available for 40mm or 42mm con rod journals)

    -Trust Washer set

     

    40mm con rod bearings are commonly found in 4AGE 16V 3 rib engines between Years 1983-1987

    42mm con rod bearings are commonly found in 4AGE 7 rib engines 16V and 20V between Years 1987-2000

    *please make sure to measure your crankshaft before purchase to ensure you purchase the correct bearings for your engine, these bearings are non returnable.

  • AE86 Plastic Clip Assortment Kit

    43.73 (excl. VAT 35.55)

    AE86 Assortment plastic clip and screw kit

    *Kit includes the following:

    -Door card clips
    -Sideskirt / bumper mounting clips
    -Wing liner / mudguard clips
    -Sidelight, indicator, quarter vent clips
    -Boot carpet clips
    -Interior plastic push clips
    -Armrest clips
    -Door rubber clips
    -Interior screws, big and small type
    -Wing liner and sideskirt screws
    -Windscreen trim clips
    and more…..

    *Assortment may vary

    This kit has been made specifically for the AE86 by ourselves www.flos.ie and consists of the most commonly used clips and screws on any AE86

  • ARP Head Stud Set 4age 16v

    184.50 (excl. VAT 150.00)

    ARP Head Stud set for 4AGE 16v and 4AGZE 16v engines

    Includes 16 studs, 16 washers and 16 nuts

    This is the updated ARP kit has the stud with extra clearance for the distributor

  • ARP Main Bearing Stud / Bolt Kit 4AGE

    94.89162.10

    Available as a stud or bolt kit
    Suitable for both 16v and 20v engines

  • AW11 Mr2 Polybushing Kit

    300.00 (excl. VAT 243.90)

    Bushing kit includes:

    Front 18mm Anti-roll bushings

    Front strut rod kit

    Front control arm kit

    Steering rack bushings

    Rear strut rod kit

    Rear control arm kit

     

     

  • Battery Pole Adaptors

    6.00 (excl. VAT 4.88)

    Battery pole adaptors

    to convert your japanese type battery poles to the large poles

    sold as a pair

  • BC Con Rods 4AGE

    795.00 (excl. VAT 646.34)

    Brian Crower Con Rods for 4age

    To suit 16v and 20v 4age engines with 42mm big end and 20mm small end

    * note some 4age blocks may require machine work to allow clearance for these rods

  • BC Racing Coilovers AW11

    1,137.75 (excl. VAT 925.00)

    BC Racing coilovers for Toyota MR2 AW11

    Delivery time approx 2 weeks

Showing 1–12 of 69 results